| Customization: | Available |
|---|---|
| After-sales Service: | Heller SMT PCB Reflow Oven 1913 Mk5 |
| Condition: | New |
|
Still deciding? Get samples of US$ 90000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Meraif is the leading SMT factory solution provider in China,offering professional SMT factory building advice and service.
We have 18 year experience about SMT factories,offering full solutions for global clients with our great advantaged sources.
All SMT machines and SMT spare parts for PCBA assembly we can support you ,SMT pick and place machines,SMT Solder Paste Printers, Reflow Oven, Wave Soldering Machines,3D AOI,3D SPI,PCB Cleaning Machines,PCB Cutting Machines.
Our core technology team members are well experienced in SMT filed, One-stop SMT Solution for PCBA factory Through Asian supply chain output, Meraif support customers build factories including technical evaluation, equipment provision, workshop planning, technical support .
HELLER 1913 MK5 SMT Reflow Oven
The ultimate high volume Surface Mount Technology production solution with belt speeds up to 1.4m/min to accommodate the fastest pick-and-place systems delivering the highest levels of repeatability with the lowest delta Ts.
With a high-capacity, 26-inch wide heater module, the 1900 Mk5 Series reflow oven machine system offers unmatched flexibility in PCB handling. The oven may be fitted with an adjustable single-rail edge hold conveyor/mesh belt combo, to carry even the largest boards or multi-board panels (up to 20 inches wide) through the oven.
Heller SMT reflow and curing ovens offer advantages such as lower operating costs, greater flexibility, reduced maintenance and higher throughput. The new flux system eliminates maintenance by trapping the flux in a separate collection box with easy to remove plates. As a result, the oven tunnel is kept clean saving countless hours of cleaning.
Features
| MODEL | 1913MKIII (Air) | 1913MKIII (Nitrogen) |
| Electric Supply | ||
| Power Input(3 Phase)Standard | 480 volts | 480 volts |
| Breaker Size | 100 amps @480v | 100 amps @480v |
| kW | 12-19 Continuous | 12-19 Continuous |
| Typical Run Current | 30-35 amps@480v | 30-35 amps @480v |
| Optional Power Inputs Available | 208/240/380/400/415VAC | 208/240/380/400/415 VAC |
| Frequency | 50/60 Hz | 50/60 Hz |
| Sequential Zone Turn On | S | S |
| Dimensions | ||
| Overall Oven Dimensions | 232"x54"x63" | 589 cmx137 cm x 160 cm |
| Typical Net Weight | 6380 lbs. (2900 kg) | 6380 lbs. (2900 kg) |
| Typical Shipping Weight | 7875 lbs. (3580 kg) | 7475 lbs. (3680 kg) |
| Computer Control | ||
| AMD or Intel Based Computer | S | S |
| Flat Screen Monitor w/Mount | S | S |
| Windows Operating System | Windows Vista/7R | Windows Vista/7R |
| Auto Start Software | S | S |
| Data Logging | S | S |
| Password Protection | S | S |
| LAN Networking | 0 | 0 |
| Inert Atmosphere | ||
| Minimum PPM Oxygen | 10-25 PPM | |
| Waterless Cooling w/Flux Separation System |
0 | |
| Nitrogen On/Off Valve | 0 | |
| Oxygen Monitoring System | 0 | |
| Nitrogen Standby System | 0 | |
| Typical Nitrogen Consumption | 500-700 SCFH* | |
| Additional Features | ||
| KIC Profiling Software | S | S |
| Signal Light Tower | S | S |
| Powered Hood Lift | S | S |
| Five (5)Thermocouple Profiling | S | S |
| Redundant Alarm Sensors | 0 | 0 |
| Intelligent Exhaust System | 0 | 0 |
| KIC Profiler/ECD Profiler | 0 | 0 |
| Center Board Support | 0 | 0 |
| Board Drop Sensor | 0 | 0 |
| Board Counter | 0 | 0 |
| Bar Code Reader | 0 | 0 |
| Custom Paint &Decal | 0 | 0 |
| Battery Backup for Conveyor and PC | 0 | 0 |
| GEM/SECS Interfacing | 0 | 0 |
| Mesh Belt Conveyor | ||
| Height From Floor | 35.5"±2.0"(90 cm±5 cm) | 35.5"±2.0"(90 cm±5 cm) |
| Maximum PCB Width | 10"(25 cm)15"(38 cm)18"(46 cm) 20"(50 cm)22~24"(56~61 cm)* |
10"(25 cm)15"(38 cm)18"(46 cm) 20"(50 cm)22~24"(56~61 cm)* |
| Space Required Between PCB's | 0.0"(0.0 cm) | 0.0"(0.0 cm) |
| Conveyor Length On-Load | 18"(46 cm)* | 6"(15 cm)* |
| Conveyor Length Off-Load | 18"(46 cm)* | 6"(15 cm)* |
| Heated Tunnel Length | 135"(343 cm) | 135"(343 cm) |
| Process Clearance Above Mesh Belt | 2.3"(5.8 cm) | 2.3"(5.8 cm) |
| Mesh Belt Pitch | 0.5"(1.27 cm) | 0.5"(1.27 cm) |
| Maximum Conveyor Speed | 74"/Min(188 cm/min.) | 74"/Min(188 cm/min.) |
| Conveyor Direction Left to Right | S | S |
| Conveyor Direction Right to Left | 0 | 0 |
| Edge Hold Conveyor System Option | ||
| Height from Floor-Standard | 37.0"±2.0"(94 cm±5 cm) | 37.0"±2.0"(94 cm±5 cm) |
| Height from Floor-Optional | 32.6"+3.9"/-.4" (83 cm+10 cm/-1 cm) |
32.6"+3.9"/-.4" (83 cm+10 cm/-1 cm) |
| Clearance Above &Below Conveyor Pins | 1.15"(2.9 cm) | 1.15"(2.9 cm) |
| Length of PCB Support Pins | .187"(4.75 mm) | 187"(4.75 mm) |
| 3 mm long support pins | 0 | 0 |
| Minimum/Maximum Board Width | 2.0"-24"*(5-61 cm) | 2.0"-24"*(5-61 cm) |
| Power Width Adjustment | S | S |
| Computer Controlled Width Adjust | 0 | 0 |
| Auto Lubrication System | 0 | 0 |
| Forced Convection Zones | ||
| Top&Bottom | 13 | 13 |
| Heater Type | Instant response open coil | Instant response open coil |
| Heater Material | Nichrome | Nichrome |
| Profile Change Time | 5-15 minutes | 5-15 minutes |
| Temperature Control | ||
| Accuracy ofTemperature Controller | +.1C | +.1°C |
| Cross-Belt Temperature Tolerance | +2.0ºC | +2.0ºC |
| Heater Wattage Per Zone | 6000w | 6000w |
| Temperature Range Standard | 65-350ºC | 65-350ºC |
| High Temperature Up to 450ºC | 0 | 0 |
| Cooling Systems | ||
| Number of Cooling Zones Standard | 3 | 3 (4 optional) |
| Bottom Cooling Zones | 0 | 0 |
| Water Cooling | 0 | |
| External Cooling | 0 | 0 |
| Notes: S=Standard,O=Optional.*A 12"(30 cm)Conveyor extension is an available option | ||
){kind=link}